juniper srx300_firmware 不充分的加密强度
CVE编号
CVE-2015-5361利用情况
暂无补丁情况
N/A披露时间
2020-02-29漏洞描述
Background For regular, unencrypted FTP traffic, the FTP ALG can inspect the unencrypted control channel and open related sessions for the FTP data channel. These related sessions (gates) are specific to source and destination IPs and ports of client and server. The design intent of the ftps-extensions option (which is disabled by default) is to provide similar functionality when the SRX secures the FTP/FTPS client. As the control channel is encrypted, the FTP ALG cannot inspect the port specific information and will open a wider TCP data channel (gate) from client IP to server IP on all destination TCP ports. In FTP/FTPS client environments to an enterprise network or the Internet, this is the desired behavior as it allows firewall policy to be written to FTP/FTPS servers on well-known control ports without using a policy with destination IP ANY and destination port ANY. Issue The ftps-extensions option is not intended or recommended where the SRX secures the FTPS server, as the wide data channel session (gate) will allow the FTPS client temporary access to all TCP ports on the FTPS server. The data session is associated to the control channel and will be closed when the control channel session closes. Depending on the configuration of the FTPS server, supporting load-balancer, and SRX inactivity-timeout values, the server/load-balancer and SRX may keep the control channel open for an extended period of time, allowing an FTPS client access for an equal duration.? Note that the ftps-extensions option is not enabled by default.解决建议
建议您更新当前系统或软件至最新版，完成漏洞的修复。
参考链接 |
|
|---|---|
| https://kb.juniper.net/JSA10706 |
受影响软件情况
| # | 类型 | 厂商 | 产品 | 版本 | 影响面 | ||||
| 1 | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 运行在以下环境 | |||||||||
| 系统 | juniper | srx1500_firmware | - | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | srx300_firmware | - | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | srx4100_firmware | - | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | srx4200_firmware | - | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | srx4600_firmware | - | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | srx5400_firmware | - | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | srx550_firmware | - | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | srx5600_firmware | - | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | srx5800_firmware | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | srx1500 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | srx300 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | srx4100 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | srx4200 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | srx4600 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | srx5400 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | srx550 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | srx5600 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | srx5800 | - | - | |||||
- 攻击路径 网络
- 攻击复杂度 低
- 权限要求 无
- 影响范围 未更改
- 用户交互 无
- 可用性 无
- 保密性 低
- 完整性 低
| CWE-ID | 漏洞类型 |
| CWE-326 | 不充分的加密强度 |
Exp相关链接
版权声明
本站原创文章转载请注明文章出处及链接，谢谢合作！
评论