USB: dwc3: core：切换模式时执行核心软重置 (CVE-2021-46941)
CVE编号
CVE-2021-46941利用情况
暂无补丁情况
N/A披露时间
2024-02-28漏洞描述
In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: Do core softreset when switch mode According to the programming guide, to switch mode for DRD controller, the driver needs to do the following. To switch from device to host: 1. Reset controller with GCTL.CoreSoftReset 2. Set GCTL.PrtCapDir(host mode) 3. Reset the host with USBCMD.HCRESET 4. Then follow up with the initializing host registers sequence To switch from host to device: 1. Reset controller with GCTL.CoreSoftReset 2. Set GCTL.PrtCapDir(device mode) 3. Reset the device with DCTL.CSftRst 4. Then follow up with the initializing registers sequence Currently we're missing step 1) to do GCTL.CoreSoftReset and step 3) of switching from host to device. John Stult reported a lockup issue seen with HiKey960 platform without these steps[1]. Similar issue is observed with Ferry's testing platform[2]. So, apply the required steps along with some fixes to Yu Chen's and John Stultz's version. The main fixes to their versions are the missing wait for clocks synchronization before clearing GCTL.CoreSoftReset and only apply DCTL.CSftRst when switching from host to device. [1] https://lore.kernel.org/linux-usb/[email protected]/ [2] https://lore.kernel.org/linux-usb/[email protected]/解决建议
建议您更新当前系统或软件至最新版，完成漏洞的修复。- 攻击路径 N/A
- 攻击复杂度 N/A
- 权限要求 N/A
- 影响范围 N/A
- 用户交互 N/A
- 可用性 N/A
- 保密性 N/A
- 完整性 N/A
| CWE-ID | 漏洞类型 |
Exp相关链接
版权声明
本站原创文章转载请注明文章出处及链接，谢谢合作！
评论