juniper junos 初始化不恰当
CVE编号
CVE-2022-22169利用情况
暂无补丁情况
N/A披露时间
2022-01-19漏洞描述
An Improper Initialization vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker who sends specific packets in certain orders and at specific timings to force OSPFv3 to unexpectedly enter graceful-restart (GR helper mode) even though there is not any Grace-LSA received in OSPFv3 causing a Denial of Service (DoS). Unexpectedly entering GR helper mode might cause the OSPFv3 neighbor adjacency formed on this interface to be stuck in the "INIT" state which can be observed by issuing the following command: user@device> show ospf3 neighbor ID Interface State xx.xx.xx.xx ae100.0 Init <<<<<<<<<< An indicator of compromise can be seen in log files when traceoptions for OSPFv3 are enabled before the issue occurs. These logfile messages are as follows: OSPF restart signaling: Received hello with LR bit set from nbr ip=xx::xx id=xx.xx.xx.xx. Set oob-resync capabilty 1. OSPF Restart Signaling: Start helper mode for nbr ip xx::xx id xx.xx.xx.xx OSPF restart signaling: abort helper mode for nbr ip=xx::xx id=xx.xx.xx.xx OSPF neighbor xx::xx (realm ipv6-unicast <interface.unit> area xx.xx.xx.xx) state changed from Full to Init due to 1WayRcvd (event reason: neighbor is in one-way mode) (nbr helped: 0) This issue affects: Juniper Networks Junos OS. 15.1 versions prior to 15.1R7-S11; 18.3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S10; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S7, 19.2R3-S4; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R3-S6; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2. This issue does not affect any version of Juniper Networks Junos OS 12.3. This issue affects Juniper Networks Junos OS Evolved all versions prior to 21.2R2-EVO.解决建议
建议您更新当前系统或软件至最新版，完成漏洞的修复。
参考链接 |
|
|---|---|
| https://kb.juniper.net/JSA11276 |
受影响软件情况
| # | 类型 | 厂商 | 产品 | 版本 | 影响面 | ||||
| 1 | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 15.1 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 18.3 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 18.4 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 19.1 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 19.2 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 19.3 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 19.4 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 20.1 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 20.2 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 20.3 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 20.4 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 21.1 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 21.2 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos_os_evolved | * | Up to (excluding) 21.2 | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos_os_evolved | 21.2 | - | |||||
- 攻击路径 网络
- 攻击复杂度 高
- 权限要求 无
- 影响范围 未更改
- 用户交互 无
- 可用性 高
- 保密性 无
- 完整性 无
| CWE-ID | 漏洞类型 |
| CWE-665 | 初始化不恰当 |
Exp相关链接
版权声明
本站原创文章转载请注明文章出处及链接，谢谢合作！
评论