juniper junos 未加控制的资源消耗（资源穷尽）
CVE编号
CVE-2021-0238利用情况
暂无补丁情况
N/A披露时间
2021-04-23漏洞描述
When a MX Series is configured as a Broadband Network Gateway (BNG) based on Layer 2 Tunneling Protocol (L2TP), executing certain CLI command may cause the system to run out of disk space, excessive disk usage may cause other complications. An administrator can use the following CLI command to monitor the available disk space: user@device> show system storage Filesystem Size Used Avail Capacity Mounted on /dev/gpt/junos 19G 18G 147M 99% /.mount <<<<< running out of space tmpfs 21G 16K 21G 0% /.mount/tmp tmpfs 5.3G 1.7M 5.3G 0% /.mount/mfs This issue affects Juniper Networks Junos OS on MX Series: 17.3R1 and later versions prior to 17.4R3-S5, 18.1 versions prior to 18.1R3-S13, 18.2 versions prior to 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S7; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R2-S4, 19.4R3-S2; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2; 20.4 versions prior to 20.4R1-S1, 20.4R2; This issue does not affect Juniper Networks Junos OS versions prior to 17.3R1.解决建议
建议您更新当前系统或软件至最新版，完成漏洞的修复。
参考链接 |
|
|---|---|
| https://kb.juniper.net/JSA11133 |
受影响软件情况
| # | 类型 | 厂商 | 产品 | 版本 | 影响面 | ||||
| 1 | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 17.3 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 18.1 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 18.2 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 18.3 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 19.1 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 19.2 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 19.3 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 19.4 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 20.1 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 20.2 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 20.3 | - | |||||
| 运行在以下环境 | |||||||||
| 系统 | juniper | junos | 20.4 | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | mx10 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | mx10000 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | mx10003 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | mx104 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | mx150 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | mx2008 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | mx2010 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | mx2020 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | mx204 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | mx40 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | mx480 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | mx5 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | mx80 | - | - | |||||
| 运行在以下环境 | |||||||||
| 硬件 | juniper | mx960 | - | - | |||||
- 攻击路径 本地
- 攻击复杂度 低
- 权限要求 低
- 影响范围 未更改
- 用户交互 无
- 可用性 高
- 保密性 无
- 完整性 无
| CWE-ID | 漏洞类型 |
| CWE-400 | 未加控制的资源消耗（资源穷尽） |
Exp相关链接
版权声明
本站原创文章转载请注明文章出处及链接，谢谢合作！
评论